首页 > 游戏 > 单机 > 正文

最终幻想零式HD修改自由时间方法介绍

2019-11-30 09:04:09
字体:
来源:转载
供稿:网友

今天小编给大家带来的是一位玩家分享的《最终幻想零式HD》修改自由时间方法,不知道怎么修改自由时间的玩家,快跟小编一起来看看吧!

www.VeVB.COm

首先需要下载CE(Cheat Engine)

If that's true then "fftype0hd.exe+6D0EC0"/"7FF632880EC0" is the "Time to Mission" address.

Hours go like this -

(Was up to 1day 12hours but I skipped over 1d12h and 1d10h and accidentally saved on top of them)

1day 8hours - 131076

1day 6hours - 262150

1day 4hours- 393224

1day 2hours - 524298

12hours - 1441816

10hours - 1572890

8hours - 1703964

6hours - 1835038

4hours - 1966112

2hours - 2097186

Mission Day - 2228224

They're divided by 131074 in between each 12 hours.

There's a possibility that the address isn't fixed, which I highly doubt since all lazy ports tend to have them fixed.

If the address turns out to be blank or some of the numbers aren't the same then you can easily find it by looking for:

"Unknown Initial Value" and going "Increased Value" or "Increased Value By 131074" each time you skip 2 hours.

以上可以看到各个时间的数值(每过2个小时+131074)

也提示了大家,地址(数值)是会变化的(我的就是这样)

拿我自己的比喻:

时间是离任务时间还剩4小时

1.先用CE搜索   Unknown Initial Value (未知的初始数值)

2.再用掉2个小时,剩2个小时,再用CE搜索  增加的数值131074 ,会出现很多数值

3.载入存档(因为地址还很多,可我剩下2个小时)回到剩下4个小时的存档

4.再用CE搜索减少的数值,就看见只有一个地址(记下数值)

5.先不要修改,跑去再用掉2个小时(剩下2个小时)

6.看到了数值变动了,试着把数值改回刚刚的数值

7.切换地点,看下时间是否回到4个小时,如果有变回4个小时,就代表你成功了

本人试了,修改完后再去用掉2个小时(4个小时->2个小时)

变成了2个小时,所以是有效果的,只是修改麻烦点……

发表评论 共有条评论
用户名: 密码:
验证码: 匿名发表