最近因工作需要,上面要求,每天需上报运维的几百数通设备端口使用情况【】,虽然有现成网管监控工具监控设备状态,但做报表,有点不方便,特写了个小脚本。
注:测试运行于ubuntn,需安装snmpwalk工具,
目标数通设备,需做好相关snmp配置
import os,sys
import re
from pprint import pprint
#甯歌 伴 璁惧 MIB ?
MIB = {
'public':{
'ports':{
'string':'.1.3.6.1.2.1.2.2.1.2',
'status':'.1.3.6.1.2.1.2.2.1.8', #2 down
}
},
'huawei':{
},
'cisco':{
}
}
#绔 舵 杞
def portStatus(_s):
if int(_s)==2:
return 'down'
elif int(_s)==1:
return 'up'
else:
return 'none'
# ц 绯荤 戒护snmpwalk璋
def snmpwalk(host,publicKey,iso):
return [i.strip() for i in os.popen('/usr/bin/snmpwalk -c %s -v 2c %s %s'%(publicKey,host,iso)).readlines()]
def getPorts(_ip,_public,option):
if option == 'ports':
postsString = (j.split('=')[1].split(':')[1].replace('"','').strip() for j in snmpwalk(_ip,_public,MIB['public']['ports']['string']))
postsStatus = (int(j.split('=')[1].split(':')[1].strip()) for j in snmpwalk(_ip,_public,MIB['public']['ports']['status']))
return zip(postsString,postsStatus)
else:
print('on this commmnad')
publicKey = 'hi' #sunmp public key
HOSTS={
'10.221.98.2':{'type':'switch','origin':'quidway','public':publicKey},
'10.221.98.3':{'type':'switch','origin':'quidway','public':publicKey},
'10.221.97.108':{'type':'firewall','origin':'h3c','public':publicKey},
'10.231.98.233':{'type':'switch','origin':'cisco','public':publicKey},
}
if __name__ == '__main__':
for i in HOSTS.keys():
for host,status in getPorts(i,HOSTS[i]['public'],'ports'):
print("%s/t%s/t%s"%(i,host.ljust(30),portStatus(status).ljust(20)))
print(''.ljust(50,'#'))
运行结果
新闻热点
疑难解答
图片精选