银行常用的打印程序

2019-11-17 05:29:40

字体：大中小

来源：转载

供稿：网友

/*如:
输入:25001 输出:贰万伍仟零壹元输入:123.45输出:壹佰貳拾叁元肆角伍分
*/
#include<stdio.h>
#include<stdlib.h>char *p[10]={"零","一","二","三","四","五","六","七","八","九"};int In_Save(char a[], char b[]);/*输入并存储数据*/
void PRint_Zh(char a[], int len);/*输出整数部分 */
void Print_X(char a[]);/*输出小数部分 */int main(void)
{
   char Zh_Shu[26], X_Shu[10];
   int len;

   len=In_Save(Zh_Shu, X_Shu);
   Print_Zh(Zh_Shu, len);
   Print_X(X_Shu);

   system("pause");
   return 0;
}int In_Save(char a[], char b[])
{
   char ch;
   int i, j;

a: puts("输入一个数:");
   scanf("%c", &ch);
   while(ch != '/n')/*存储整数部分*/
   {
      i=0;
      j=0;
      while(ch != '.' && ch >= '0' && ch <= '9')
      {
         a[i++]=ch;
         scanf("%c", &ch);
      }
      if(ch == '.')/*存储小数部分*/
      {
         scanf("%c", &ch);
         while(ch != '/n' && ch >= '0' && ch <= '9')
         {
            b[j++]=ch;
            scanf("%c", &ch);
         }
         if(b[4] >= 5)/*四舍五入*/
         b[3] += 1;
      }
      else if(ch == '/n')/*注重没有输入小数的情况*/
      ;
      else/*输入错误（主要指输入非数字符号）可以重试*/
      {
         puts("输入错误！请重试");
         goto a;
      }
   }
   return i;
} void Print_Zh(char a[], int len)
{
   int i, j, flag1, flag2, flag3;
   flag1=(a[len-6]=='0' && a[len-7]=='0' && a[len-8]=='0');
   flag2=(a[len-14]=='0' && a[len-15]=='0' && a[len-16]=='0');
   flag3=(a[len-22]=='0' && a[len-23]=='0' && a[len-24]=='0');
   printf("你输入了：/n");
   for(i=0,j=len; i<len && j>0; i++,j--)
   {
      if(a[i] == '0' && i != len-1)
      {
         if((j == 5 && flag1) (j == 13 && flag2) (j == 21 && flag3 ))
         ; /*不重复读万，如将1000000050误读作一十亿万零五十圆*/
         else if((j == 21 && ! flag3 )(j == 5 && ! flag1)(j == 13 && ! flag2))
         printf("万");    /*正确的读法应该是一十亿零五十圆*/
         else if(j == 9 j == 17 )/*重复读亿*/
          printf("亿");
       else if(a[i+1] == '0' && i != len-1)/*不重复读零*/
         ;
         else if(a[i+1] != '0' && i != len-1)
         printf("零");
         else
         ;
      }
     else if(a[i] == '0' && i == len-1)
       ;
      else if(a[i] != '0')
      {
         switch(a[i])/*读入数字*/
         {
            case '1': printf("%s",p[1]); break;
            case '2': printf("%s",p[2]); break;
            case '3': printf("%s",p[3]); break;
            case '4': printf("%s",p[4]); break;
            case '5': printf("%s",p[5]); break;
            case '6': printf("%s",p[6]); break;
            case '7': printf("%s",p[7]); break;
            case '8': printf("%s",p[8]); break;
            case '9': printf("%s",p[9]); break;
            default: printf("error"); ; break;
         }
         switch(j)/*读入单位*/
         {
            case 2: printf("%s","十"); break;
            case 3: printf("%s","百"); break;
            case 4: printf("%s","千"); break;
            case 5: printf("%s","万"); break;
            case 6: printf("%s","十"); break;
            case 7: printf("%s","百"); break;
            case 8: printf("%s","千"); break;
            case 9: printf("%s","亿"); break;
            case 10: printf("%s","十"); break;
            case 11: printf("%s","百"); break;
            case 12: printf("%s","千"); break;
            case 13: printf("%s","万"); break;
            case 14: printf("%s","十"); break;
            case 15: printf("%s","百"); break;
            case 16: printf("%s","千"); break;
            case 17: printf("%s","亿"); break;
            case 18: printf("%s","十"); break;
            case

上一篇：一个有趣的问题的C语言编程

下一篇：一个排序用的C++函数模板