飞思卡尔相关命令

2019-11-09 16:49:41

字体：大中小

来源：转载

供稿：网友

10.193.102.84 mpuapae b46827 fsl10.193.102.36 mpusw b46827 b46827Release Server//10.192.224.48Test vector servermount -o nolock,tcp -t nfs 10.192.224.45:/home/testVectors/ttVector dir//10.192.224.88/daily_images//10.192.224.48/Android_Release/nxa07087repo init -u git://repomad1/platform/manifest.git -b maddev_kk4.4.3_2.0.0-ga-rc2 --repo-url=git://repomad1/tools/repo.gitrepo init -u http://androidsource.ap.freescale.net/PRoject/p/platform/manifest.git -b maddev_mm6.0-gayocto编译器目录export CROSS_COMPILE=/opt/poky/1.5.1/sysroots/x86_64-linux/usr/bin/arm-poky-linux-gnueabi-nohup 不让终端挂起smbpasswd 修改smaba密码uname :Print certain system informationscreenscreencapsource setup-environment <build-dir>bitbake linux-imx -c listtasksbitbake linux-imx -c compile -fbitbake linux-imx -c installsudo dd if=<image name>.sdcard of=/dev/sd<partition> bs=1M && syncsetenv mmcargs 'setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} maxcpus=1'/home/b46827/nfsroot *(rw,sync,no_root_squash) (etc/exports)mount -t nfs -o nolock 10.193.102.84:/home/b46827/nfsroot/rootfs /mnt/nfs#sudo /etc/init.d/portmap restart #sudo /etc/init.d/nfs-kernel-server restart mount -t nfs -o nolock 10.192.244.6:/rootfs/wb /mnt/nfsmount -t vfat /dev/sdb /mnt/usbmount -o rw,remount /systemsudo dd if=u-boot.imx of=/dev/sdc bs=512 seek=2 conv=fsyncsudo dd if=uImage-imx6qsabresd.bin of=/dev/sdc bs=512 seek=2048 conv=fsyncsudo dd if=uImage-imx6q-sabresd.dtb of=/dev/sdc bs=512 seek=20480 conv=fsyncmodprobe g_mass_storage file=/dev/mmcblk1p1 removable=1gst-launch-1.0 filesrc location=AAC-test.aac ! queue ! aacparse ! beepdec ! pulsesinksetenv nfsroot /home/b46827/nfsroot/rootfs/fsl-image-qt5-imx6qdlsolo-x11-3.10.53_1.1.1setenv nfsroot /home/b46827/nfsroot/rootfs/fsl-image-qt5-imx6qdlsolo-x11-3.14.28setenv serverip 10.193.102.84setenv fdt_file imx6q-sabresd-zhengtao.dtbsetenv image zImage-zhengtao git send-email --no-chain-reply-to --no-signed-off-by-cc --suppress-cc all -quiet --to B47624@freescale.com --cc b29397@freescale.com --cc LNXREVLI@internal.freescale.com --cc b46827@freescale.com git format-patch --subject-prefix="PATCH v3" --stat -n --cover-letter -2 -o outgoing ./scripts/dtc/dtc -I dts -O dtb -o <devicetree name>.dtb <devicetree name>.dts ./scripts/dtc/dtc -I dtb -O dts -o <devicetree name>.dts <devicetree name>.dtb make ARCH=arm <devicetree name>.dtb make modules_install INSTALL_MOD_PATH=/home/b46827/nfsroot/rootfs/3.10.17_rootfs git config remote.origin.urlexport https_proxy=wwwgate0-az.freescale.net:1080export http_proxy=wwwgate0-az.freescale.net:1080export no_proxy=.am.freescale.net,.freescale.netexport https_proxy=wwwgate0.freescale.net:1080export http_proxy=wwwgate0.freescale.net:1080export no_proxy=.am.freescale.net,.freescale.netiperf -s -u -p 4iperf -c 10.0.0.1 -u -n 100M -p 4 diff -ruN log2013.log log2014.log >patch.logpatch-p0< xxx.patch export BUILD_ROOT_DIR=`pwd`export ARCH=armexport CROSS_COMPILE="$BUILD_ROOT_DIR"/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-echo BUILD_ROOT_DIR="$BUILD_ROOT_DIR"echo CROSS_COMPILE="$CROSS_COMPILE" 然后到uboot目录make $DEF_CONFIGthen make -姐make -j4 mm bootimage -j8 mm snod make KLIB=~/kk4.4.2_1.0.0_ga_bluez/kernel_imx KLIB_BUILD=~/kk4.4.2_1.0.0_ga_bluez/kernel_imx -j8arm-poky-linux-gnueabi-gcc -c libusb-test.c -o libusb-test.o -I ./libusb-1.0.9/install/include/libusb-1.0/arm-poky-linux-gnueabi-gcc libusb-test.o -o libusb-test -L ./libusb-1.0.9/install/lib/ -lusb-1.0download Mode(MFGTool mode) (SW6) 00001100 (from 1-8 bit)eMMC 4-bit (MMC3) boot (SW6) 11100110 (from 1-8 bit)eMMC 8-bit (MMC3) boot (SW6) 11010110 (from 1-8 bit)MMC4 (SD2) boot (SW6) 10000010 (from 1-8 bit)MMC2 (SD3) boot (SW6) 01000010 (from 1-8 bit)setenv image zImage-zhengtaosetenv fdt_file imx6q-sabresd-zhengtao.dtbsetenv nfsroot /home/b46827/nfsroot/rootfs/fsl-image-qt5-3.10.53make uImage LOADADDR=0x10008000setenv serverip 10.193.102.84setenv bootcmd_net 'run bootargs_base bootargs_nfs; dhcp ${loadaddr} ${kernel}; bootm'mm6.0setenv bootargs console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=256M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M androidboot.serialno=141031d4d81917c9 androidboot.selinux=disabled androidboot.dm_verity=disabledsetenv bootargs console=ttymxc3,115200 init=/init video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off /vmalloc=320M androidboot.console=ttymxc3 consoleblank=0 androidboot.hardware=freescale cma=384M mtdparts=gpmi-nand:64m(bootloader),16m(bootimg),16m(recovery),-(root) ubi.mtd=3setenv bootargs console=ttymxc3,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=320M androidboot.console=ttymxc3 consoleblank=0 androidboot.hardware=freescale cma=384M mtdparts=gpmi-nand:64m(bootloader),16m(bootimg),16m(recovery),-(root) ubi.mtd=3lp5.0setenv bootargs console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off vmalloc=400M androidboot.console=ttymxc0 consoleblank=0 androidboot.hardware=freescale cma=384M androidboot.serialno=051cc9d4d72d78c7 androidboot.selinux=disabled androidboot.dm_verity=disabledout/host/linux-x86/bin/mkbootimg --kernel kernel_imx/arch/arm/boot/zImage --ramdisk out/target/product/sabresd_6dq/ramdisk.img --base 0x10800000 --second out/target/product/sabresd_6dq/imx6q-sabresd.dtb --cmdline "console=ttymxc0,115200 init=/init rw video=mxcfb0 vmalloc=400M androidboot.selinux=disabled androidboot.dm_verity=disabled" --board sabersd_6dq -o boot.imgkk4.4.2setenv bootargs console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off fbmem=10M vmalloc=400M androidboot.console=ttymxc0 androidboot.hardware=freescale androidboot.selinux=disabledjb4.3out/host/linux-x86/bin/mkbootimg --kernel kernel_imx/arch/arm/boot/zImage --ramdisk out/target/product/sabresd_6dq/ramdisk.img --cmdline "console=ttymxc0,115200 init=/init video=mxcfb0:dev=ldb,bpp=32 video=mxcfb1:off video=mxcfb2:off fbmem=10M fb0base=0x27b00000 vmalloc=400M androidboot.console=ttymxc0 androidboot.hardware=freescale" --base 0x10800000 --output boot.imgsetenv netargs 'setenv bootargs console=${console},${baudrate} ${smp} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp maxcpus=1'/etc/init.d/weston stopexport XDG_RUNTIME_DIR=/var/runweston --tty=1 --use-gal2d=1 --use-gl=0 --device=/dev/fb0,/dev/fb3 &echo 0 > /sys/class/graphics/fb3/blankweston –tty=1 –use-gl=0 –use-gal2d=1 –device=”dev/fb0,/dev/fb2” &setenv netargs 'setenv bootargs console=${console},${baudrate} ${smp} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp video=mxcfb0:dev=ldb,LDBXGA,if=RGB666 ldb=dul0'setenv netargs 'setenv bootargs console=${console},${baudrate} ${smp} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp ldb=dul1'setenv netargs 'setenv bootargs console=${console},${baudrate} ${smp} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp'setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} mmcautodetect=yessetenv mmcargs 'setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} video=mxcfb0:dev=ldb,LDB-1080P60,if=RGB24,bpp=32 ldb=spl1'setenv bootcmd_net 'run bootargs_base bootargs_nfs; dhcp ${loadaddr} ${kernel}; bootm'setenv netargs 'setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp video=mxcfb0:dev=sii902x_hdmi,1920x1080M@60,if=RGB24 video=mxcfb1:off video=mxcfb2:off consoleblank=0'trace32data.load.elf gst-launch filesrc location=MySunshine.mp3 ! id3demux ! queue ! mpegaudioparse ! beepdec ! alsasinktar -cf file7.tar file4 file5 file6 bzip2 file7.tartar -cjf file7.tar.bz2 file4 file5 file6tar zcvf FileName.tar.gz DirNametouch /data/vpu_log_levelchmod 777 /data/vpu_log_levelecho 1 > /data/vpu_log_leveltouch /data/omx_log_levelchmod 777 /data/omx_log_levelecho 3 > /data/omx_log_levelsetprop media.omxgm.enable-player 0//10.193.102.84/public_share/Zheng Tao/Legacy patch releaseam start -n com.android.music/com.android.music.MediaPlaybackActivity -dscp gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12.tar.gz b51421@10.193.102.119:~/work/3035/fbset -fb /dev/fb0 -g 1024 768 1024 768 32export DISPLAY=:0.0setenv mmcargs 'setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24'setenv mmcargs 'setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} video=mxcfb0:dev=ldb,LDB-XGA,if=RGB666 video=mxcfb1:dev=ldb,LDB-XGA,if=RGB666 video=mxcfb2:dev=hdmi,1920x1080M@60,if=RGB24'setenv mmcargs 'setenv bootargs console=${console},${baudrate} ${smp} root=${mmcroot} video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 video=mxcfb1:dev=ldb,LDB-XGA,if=RGB666'setenv netargs 'setenv bootargs console=${console},${baudrate} ${smp} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp video=mxcfb0:dev=sii902x_hdmi,1920x1080M@60 video=mxcfb1:dev=hdmi,1920x1080M@60,if=RGB24 video=mxcfb2:dev=ldb,if=RGB666 video=mxcfb3:dev=ldb,if=RGB666'setenv netargs 'setenv bootargs console=${console},${baudrate} ${smp} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp video=mxcfb0:dev=ldb video=mxcfb1:off video=mxcfb2:off video=mxcfb2:off consoleblank=0'gst-launch-1.0 filesrc location=1080p0.mp4 typefind=true ! video/quicktime ! aiurdemux ! queue max-size-time=0 ! avdec_h264 ! imxv4l2sink device="/dev/video17"gst-launch-1.0 filesrc location=~/1080p0.mp4 typefind=true ! video/quicktime ! aiurdemux ! queue max-size-buffers=0 max-size-time=0 ! vpudec ! imxv4l2sink device="/dev/video17"gst-launch-1.0 filesrc location=test.mp4 typefind=true ! video/quicktime ! aiurdemux ! queue max-size-time=0 ! vpudec ! overlaysinkgst-launch-1.0 playbin uri=file:///$file1 playbin uri=file:///$file2 video-sink="overlaysink display-master=false display-slave=true"export VSALPHA=1$GSTL $PLAYBIN uri=file:///$file1 video-sink="mfw_isink display=LVDS"$PLAYBIN uri=file:///$file2 video-sink="mfw_isink display=HDMI"gst-launch-1.0 playbin uri=file:///1080p.mp4 video-sink="imxv4l2sink device=/dev/video17"cat /proc/cmdline ; for i in /sys/class/graphics/fb?; do echo "------------ $i"; cat $i/name; cat $i/mode; cat $i/fsl_disp_*; donedhcp 0x18000000 imx6q-sabresd-zhengtao.dtbfdt addr 0x18000000fdt print /memory#if 0#undef LOG_DEBUG#define LOG_DEBUG printf#undef LOG_WARNING#define LOG_WARNING printf#endifctrl + zfgbgweston --tty=1 --idle-time=0 &logcat -s FSLCameraHAL:Vsetprop debug.sf.showfps 1, then kill surfaceflinger ./mxc_vpu_test.out -E "-i src_1080p.yuv -o enc_1080p_270.264 -w 1920 -h 1080 -b 30000 -g 1 -a 40 -t 0 -f 2"

上一篇：建造者模式（Builder Pattern）- 最易懂的设计模式解析

下一篇：makefile模板2