首页 > 学院 > 网络通信 > 正文

Cisco3640Voip配置实例解析

2019-11-05 01:22:29
字体:
来源:转载
供稿:网友

  下面是一个Cisco 3640的VOip配置,对方的结构是台北和上海两地做VOIP,后接阿尔卡特的PBX,这是我亲手做的,里面有很多有注重的地方,与大家一起分享快乐!
  如有看不懂的地方请问我,还有我加的注解:
  Taipei#sh run
  Building configuration...
  
  Current configuration:
  !
  version 12.0
  service timestamps debug uptime(设定Debug跟踪日志显示其时间)
  service timestamps log uptime(设定看Log时显示其时间)
  no service passWord-encryption(口令不加密)
  !
  hostname Taipei(主机名)
  !
  enable secret 5 $1$R.66$z.BUjhNsJcIr8KCcS9uxG.
  !
  !
  !
  !
  !
  voice-card 1(定义语音卡1)
  !
  voice-card 3(定义语音卡3)
  !
  ip subnet-zero
  no ip domain-lookup
  !
  isdn voice-call-failure 0
  !
  !
  !
  !
  controller E1 1/0(配置 E1语音卡)
  framing NO-CRC4
  ds0-group 0 timeslots 1-15,17-31 type e&m-wink-start(定义语音卡的类型为E&M卡)
  cas-custom 0
  !
  controller E1 3/0(配置 E1语音卡)
  framing NO-CRC4
  ds0-group 0 timeslots 1-15,17-31 type e&m-wink-start(定义语音卡的类型为E&M卡)
  cas-custom 0
  !
  !
  !
  interface BRI0/0
  no ip address
  no ip directed-broadcast
  shutdown
  isdn guard-timer 0 on-eXPiry accept
  !
  interface FastEthernet0/0
  no ip address
  no ip directed-broadcast
  shutdown
  duplex auto
  speed auto
  !
  interface Serial0/0
  description "Link to MainLand_ShangHai by NCIC lease line"
  ip address 192.168.1.1 255.255.255.252
  no ip directed-broadcast
  no ip mroute-cache
  no fair-queue
  !
  interface Serial0/1
  no ip address
  no ip directed-broadcast
  shutdown
  clockrate 2000000
  !
  ip classless
  no ip http server
  !
  !
  voice-port 1/0:0(配置模拟语音端口)
  compand-type a-law
  !
  voice-port 3/0:0(配置模拟语音端口)
  compand-type a-law
  !
  dial-peer voice 1 voip (定义拨号对等体到语音)
  destination-pattern +445...(为拨号对等体分配电话号码,其中.为通配符)
  session target ipv4:192.168.1.2(定义Voip路由,为对端的IP地址)
  req-qos guaranteed-delay (语音数据流RVSP的保证,其中Guaranteed-dealy可用于保证整个网络的延时)
  ip PRecedence 5(IP优先级,5为要害)
  !
  dial-peer voice 2 pots(定义拨号对等体到语音物理端口)
  destination-pattern +3...(定义电话话码以3开头的)
  port 1/0:0(定义语音端口)
  !
  dial-peer voice 3 pots(定义拨号对等体到语音物理端口)
  destination-pattern +3...(定义电话话码以3开头的)
  port 3/0:0(定义语音端口)
  !
  !
  line con 0(设定登陆)
  transport input none
  line aux 0
  line vty 0 4(答应用Telnet)
  password cisco(口令为Cisco)
  login
  !
  end
  
  Taipei#
  
  
  上海一方的3640配置
  
  ShangHai#sh run
  Building configuration...
  
  Current configuration:
  !
  version 12.0
  service timestamps debug uptime
  service timestamps log uptime
  no service password-encryption
  !
  hostname ShangHai
  !
  enable secret 5 $1$dB/c$tnrMU9IxFCJdix5ssHAdH/
  !
  !
  !
  !
  !
  voice-card 1
  !
  voice-card 2
  !
  ip subnet-zero
  no ip domain-lookup
  !
  isdn voice-call-failure 0
  !
  !
  !
  !
  controller E1 1/0
  framing NO-CRC4
  ds0-group 0 timeslots 1-15,17-31 type e&m-immediate-start
  cas-custom 0
  !
  controller E1 2/0
  framing N
  ds0-group 0 timeslots 1-15,17-31 type e&m-immediate-start
  cas-custom 0
  !
  !
  !
  interface BRI0/0
  no ip address
  no ip directed-broadcast
  encapsulation ppp
  isdn guard-timer 0 on-expiry accept
  ppp multilink
  !
  interface FastEthernet0/0
  no ip address
  no ip directed-broadcast
  shutdown
  duplex auto
  speed auto
  !
  interface Serial0/0
  no ip address
  no ip directed-broadcast
  no ip mroute-cache
  shutdown
  no fair-queue
  clockrate 2000000
  !
  interface Serial0/1
  ip address 192.168.1.2 255.255.255.252
  no ip directed-broadcast
  !
  ip classless
  !
  no ip http server
  !
  !
  voice-port 1/0:0
  compand-type a-law
  !
  voice-port 2/0:0
  compand-type a-law
  !
  dial-peer voice 20 voip
  destination-pattern +3...
  session target ipv4:192.168.1.1
  req-qos guaranteed-delay
  ip precedence 5
  !
  dial-peer voice 10 pots
  destination-pattern +448...
  port 1/0:0
  !
  dial-peer voice 30 voip
  destination-pattern +4...
  session target ipv4:192.168.1.1
  req-qos guaranteed-delay
  ip precedence 5
  !
  dial-peer voice 40 pots
  destination-pattern +449...
  port 2/0:0
  !
  !
  line con 0
  transport input none
  line aux 0
  line vty 0 4
  password cisco
  login
  !
  end
  
  ShangHai#


发表评论 共有条评论
用户名: 密码:
验证码: 匿名发表