MGCP网关与CallManager互联配置实例

2019-11-04 21:18:20

字体：大中小

来源：转载

供稿：网友

MGCP网关与CallManager互联配置实例（图一）

点击查看大图

第一部分:MGCP Voice Gateway配置
controller E1 1/0/0
PRi-group timeslots 1-31 service mgcp
!
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 192.168.0.111
ccm-manager config
!
interface Serial1/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
!
mgcp
mgcp call-agent 192.168.0.111 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface g0/0
mgcp bind media source-interface g0/0
!
mgcp profile default
!
dial-peer voice 999 pots
service mgcpapp
port 1/0/0:15
!

第二部分:CallManager配置
Device > Gateway > Add a New Gateway > Adding a Cisco IOS MGCP Gateway

MGCP网关与CallManager互联配置实例（图二）