R2511AS#sh run in s 1.10 Building configuration...
Current configuration : 279 bytes ! interface Serial1.10 multipoint ip address 11.1.1.4 255.255.255.0 no ip route-cache ip ospf network point-to-multipoint no ip mroute-cache frame-relay map ip 11.1.1.3 403 broadcast frame-relay map ip 11.1.1.4 406 broadcast frame-relay map ip 11.1.1.6 406 broadcast end
R2511AS# ---------------------------------------------------------------------- R2511AS#sh run int s 1.11 Building configuration...
Current configuration : 164 bytes ! interface Serial1.11 point-to-point ip address 12.1.1.1 255.255.255.0 no ip route-cache ip ospf network point-to-point frame-relay interface-dlci 402 end
R2511AS# -------------------------------------------------------------------------- 分别是P2MP，P2P。两种网络类型。 配置完成后可用sh ip os nei ,sh ip os da,等show 命令来查看，sh ip os da 命令是查看OSPF链路数据库。查看数据库中没有应该出现得LSA.碰到问题用debug命令来查看在哪里出问题了。 deb ip os pa deb ip pa deb ip os adj 等命令。 －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ R2511AS#sh ip os in Serial1.10 is up, line PRotocol is up Internet Address 11.1.1.4/24, Area 0 Process ID 1, Router ID 10.0.0.1, Network Type POINT_TO_MULTIPOINT, Cost: 64 Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT, Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 Hello due in 00:00:10 Index 1/2, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 1, maximum is 2 Last flood scan time is 12 msec, maximum is 16 msec Neighbor Count is 2, Adjacent neighbor count is 2 Adjacent with neighbor 11.1.1.3 Adjacent with neighbor 192.168.0.166 Suppress hello for 0 neighbor(s) Serial1.11 is up, line protocol is up Internet Address 12.1.1.1/24, Area 1 Process ID 1, Router ID 10.0.0.1, Network Type POINT_TO_POINT, Cost: 64 Transmit Delay is 1 sec, State POINT_TO_POINT, Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:01 Index 1/1, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 1, maximum is 4 Last flood scan time is 4 msec, maximum is 8 msec Neighbor Count is 1, Adjacent neighbor count is 1 Adjacent with neighbor 192.168.0.43 Suppress hello for 0 neighbor(s) R2511AS# －－－－－－－－－－－－－－－－－－－－－ sh ip os interface,查看OSPF运行得接口。有助于排错。 －－－－－－－－－－－－－－－－－－－－－－－－－－
