首页 > 学院 > 网络通信 > 正文

PPPoA配置说明

2019-11-04 20:40:30
字体:
来源:转载
供稿:网友

  PC上配置PPPoA
  Set ip addressing to automatically oBTain an IP address.
  
  Set WINS to use DHCP for WINS resolution.
  
  Ensure that no default gateway is set.
  
  It may be necessary to set a domain name because DHCP cannot pass this information
  
  
  Cisco CPE Configuration for PPPoA
  cbos>enable
  PassWord:
  
  cbos# set nat enable
  NAT is now enabled
  You must use "write" then reboot for changes to take effect.
  
  cbos# set ppp wan0-0 login
  User name for wan0-0 has been set to testcpe.
  
  cbos# set ppp wan0-0 password
  Password for wan0-0 has been set to cisco.
  
  cbos# set ppp wan0-0 ipcp 0.0.0.0
  PPP wan0-0 IPCP Address set to 0.0.0.0
  
  cbos# set int wan0-0 close
  cbos# set int wan0-0 vpi 1
  
  cbos# set int wan0-0 vci 32
  
  cbos# set int wan0-0 open
  
  cbos# set int eth0 address 172.22.10.254
  eth0 ip address changed from 10.0.0.1 to 172.22.10.254
  
  cbos# set int eth0 netmask 255.255.255.0
  eth0 netmask changed from 255.255.255.0 to 255.255.255.0
  
  cbos# set dhcp server enable
  DHCP Server enabled
  
  cbos# set dhcp server pool 0 ip 172.22.10.0
  Pool 0 IP parameter is now 172.22.10.0
  
  cbos# set dhcp server pool 0 netmask 255.255.255.0
  Pool 0 netmask parameter is now 255.255.255.0
  
  cbos# set dhcp server pool 0 gateway 172.22.10.254
  Pool 0 gateway parameter is now 172.22.10.254
  
  cbos# set password exec
  Exec Password Change SUCcessful!
  
  cbos# set password enable
  Enable Password Change Successful!
  
  cbos# write
  NVRAM written.
  PPPoA配置说明
  Cisco DSLAM Configuration for PPPoA
  hostname 6260
  ! Subtending Port - Will set as shutdown
  interface atm0/2
  shutdown
  slot 1 atuc-1-4dmt
  !
  dsl-PRofile fast
  dmt codeword-size downstream 16 upstream 16
  dmt bitrate maximum interleaved downstream 8032 upstream 832
  !
  interface atm1/1
  dsl profile fast
  atm pvc 1 32 interface atm0/1 1 35
  
  
  
  
  Cisco LS1010 Configuration for PPPoA
  interface ATM 0/1/2
  no ip address
  no ip directed-broadcast
  no ATM ilmi-keepalive
  ATM pvp 1 interface ATM 0/0/2 1
  
  
  
  
  Cisco 7200 Configuration for PPPoA
  aaa new-model
  AAA authentication ppp default local
  !
  !
  username password
  !
  !
  interface ATM 2/0.1 multipoint
  no ip directed-broadcast
  PVC 1/35
  encapsulation aal5mux ppp Virtual-Template 2
  !
  !
  interface FastEthernet 4/0
  ip address 172.22.32.1 255.255.255.0
  no ip directed-broadcast
  !
  !
  interface Virtual-Template 2
  ip unnumbered FastEthernet 4/0
  no ip directed-broadcast
  peer default ip address pool
  ppp authentication pap
  !
  !
  ip local pool 172.22.40.10 172.22.40.25


发表评论 共有条评论
用户名: 密码:
验证码: 匿名发表