首页 > 学院 > 网络通信 > 正文

GW配置和GK配置

2019-11-04 20:40:03
字体:
来源:转载
供稿:网友

  今天整理CISCO的资料,发现一些东西,想到以后不用再做了,拿出来给大家把,这是我做CISCO三年来的总结。可能以后再也不会作了!!!谁要可以给我email。。。
  
  
  
  GW配置
  
  GW-GZ#show run
  Building configuration...
  
  Current configuration:
  !
  ! Last configuration change at 14:53:31 UTC Sat Jan 1 2000 by cisco
  ! NVRAM config last updated at 14:42:05 UTC Sat Jan 1 2000 by cisco
  !
  version 12.0
  service timestamps debug uptime
  service timestamps log uptime
  no service passWord-encryption
  !
  hostname GW-GZ
  !
  aaa new-model
  aaa authentication login h323 group radius
  aaa authentication login no_rad local
  aaa authorization exec h323 group radius
  aaa accounting connection h323 start-stop group radius
  enable secret 5 $1$Do8I$JbsgS2.d//KmrBHcAJqy2.
  enable password cisco
  !
  username cisco password 0 cisco
  !
  resource-pool disable
  !
  !
  clock calendar-valid
  ip subnet-zero
  no ip domain-lookup
  !
  mta receive maximum-recipients 0
  !
  !
  controller E1 0
   framing NO-CRC4
   ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
   cas-custom 0
  unused-abcd 0 1 1 1
  country china
  answer-signal group-b 1
  dnis-digits min 1 max 18
  !
  controller E1 1
   clock source line secondary 1
  !
  controller E1 2
   clock source line secondary 2
  !
  controller E1 3
   clock source line secondary 3
  !
  !
  voice-port 0:0
   echo-cancel coverage 32
   cptone CN
   timeouts call-disconnect 0
  !
  gw-accounting h323 vsa
  dial-peer voice 797 pots
  application clid_authen_npw
  destination-pattern 0797T
  direct-inward-dial
  port 0:0
  PRefix 0797
  !
  dial-peer voice 80797 voip
   destination-pattern 079T
   session target ras
  !
  process-max-time 200
  gateway
   !
   interface Ethernet0
   no ip address
   no ip redirects
   no ip directed-broadcast
  !
  interface Serial0
   no ip address
   no ip directed-broadcast
   no ip mroute-cache
   shutdown
   no fair-queue
   clockrate 2015232
  !
  interface Serial1
   no ip address
   no ip directed-broadcast
   shutdown
   no fair-queue
   clockrate 2015232
  !
  interface Serial2
   no ip address
   no ip directed-broadcast
   shutdown
   no fair-queue
   clockrate 2015232
  !
  interface Serial3
   no ip address
   no ip directed-broadcast
   shutdown
   no fair-queue
   clockrate 2015232
  !
  interface FastEthernet0
   ip address 10.123.15.60 255.255.255.0
   no ip directed-broadcast
   duplex auto
   speed auto
   h323-gateway voip interface
   h323-gateway voip id ganzhou ipaddr 10.123.15.69 1719
   h323-gateway voip h323-id GZ.jx.cpn
   h323-gateway voip tech-prefix 1#
  !
  no ip http server
  ip classless
  ip route 0.0.0.0 0.0.0.0 10.123.15.254
  !
  radius-server host 10.123.15.139 auth-port 1812 acct-port 1813
  radius-server retransmit 2
  radius-server timeout 4
  radius-server key voip
  radius-server vsa send accounting
  radius-server vsa send authentication
  !
  line con 0
   exec-timeout 0 0
   transport input none
   login authentication no_rad
  line aux 0
  line vty 0 4
   exec-timeout 120 0
   password cisco
  login authentication no_rad
  !
  end
  
  
  
  Active GK配置举例
  GK-NC1#show run
  Building configuration...
  
  Current configuration:
  !
  version 12.1
  service timestamps debug uptime
  service timestamps log uptime
  no service password-encryption
  !
  hostname GK-NC1
  enable secret 5 $1$Do8I$JbsgS2.d//KmrBHcAJqy2
  enable password cisco
  !
  !
  memory-size iomem 25
  ip subnet-zero
  no ip domain-lookup
  !
  !
  interface FastEthernet0/0
   ip address 10.123.15.61 255.255.255.0
   no ip redirects
   duplex auto
   speed auto
   standby 1 priority 105 preempt
   standby 1 ip 10.123.15.69
  !
  ip classless
  ip route 0.0.0.0 0.0.0.0 10.123.15.254
  no ip http server
  !
  !
  !
  gatekeeper
   zone local nanchang jx.cpn 10.123.15.69
   zone local ganzhou jx.cpn
   zone prefix nangchang 0791*
   zone prefix ganzhou 0797*
   gw-type-prefix 1#* default-technology
   arq reject-unknown-prefix
   lrq reject-unknown-prefix
   no shutdown
  !
  !
  line con 0
   exec-timeout 0 0
   login
   transport input none
  line aux 0
  line vty 0 4
   exec-timeout 120 0
   password cisco
   login
  !
  end


发表评论 共有条评论
用户名: 密码:
验证码: 匿名发表