3. 举例使用E1线路实现多个64K专线连接. 相关命令: 任务 命令 进入controller配置模式 controller {t1 e1} number 选择帧类型 framing {crc4 no-crc4} 选择line-code类型 linecode {ami b8zs hdb3} 建立逻辑通道组与时隙的映射 channel-group number timeslots range1 显示controllers接口状态 show controllers e1 [slot/port]2
注: 1. 当链路为T1时,channel-group编号为0-23, Timeslot范围1-24; 当链路为E1时, channel-group编号为0-30, Timeslot范围1-31. 2.使用show controllers e1观察controller状态,以下为帧类型为crc4时controllers正常的状态. Router# show controllers e1 e1 0/0 is up. Applique type is Channelized E1 - unbalanced Framing is CRC4, Line Code is HDB3 No alarms detected. Data in current interval (725 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Total Data (last 24 hours) 0 Line Code Violations, 0 Path Code Violations, 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins, 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs 以下例子为E1连接3条64K专线, 帧类型为NO-CRC4,非平衡链路,路由器具体设置如下: shanxi#wri t Building configuration... Current configuration: !
version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname shanxi ! enable secret 5 $1$XN08$Ttr8nfLoP9.2RgZhcBzkk/ enable passWord shanxi ! ! ip subnet-zero ! controller E1 0 framing NO-CRC4 channel-group 0 timeslots 1 channel-group 1 timeslots 2 channel-group 2 timeslots 3 ! interface Ethernet0 ip address 133.118.40.1 255.255.0.0 media-type 10BaseT ! interface Ethernet1 no ip address shutdown ! interface Serial0:0 ip address 202.119.96.1 255.255.255.252 no ip mroute-cache ! interface Serial0:1 ip address 202.119.96.5 255.255.255.252 no ip mroute-cache ! interface Serial0:2 ip address 202.119.96.9 255.255.255.252 no ip mroute-cache ! no ip classless ip route 133.210.40.0 255.255.255.0 Serial0:0 ip route 133.210.41.0 255.255.255.0 Serial0:1 ip route 133.210.42.0 255.255.255.0 Serial0:2 ! line con 0 line aux 0 line vty 0 4 password shanxi login ! end
