Centos7.0下通过Corosync+pacemaker+pcs+drbd实现mariadb的高可用 http://blog.csdn.net/wylfengyujiancheng/article/details/50670327
一、操作系统配置
1.1、准备：
两个节点node01和node02均按照centos7.0系统，每个节点两块磁盘，一块用作根分区一块用作drbd
192.168.100.11 node01
192.168100.12 node02
修改主机名：
节点1
# hostnamectl set-hostname node01
# su -l
节点2
# hostnamectl set-hostname node02
# su -l
1.2、磁盘分区如下
[root@ha-node2 corosync]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 500M 0 part /boot
└─sda2 8:2 0 19.5G 0 part
├─centos-swap253:0 0 2G 0lvm [SWAP]
└─centos-root253:1 0 17.5G 0 lvm /
sdb 8:16 0 20G 0 disk
sr0 11:0 1 1024M 0 rom
[root@ha-node1 corosync]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 20G 0 disk
├─sda1 8:1 0 500M 0 part /boot
└─sda2 8:2 0 19.5G 0 part
├─centos-swap253:0 0 2G 0lvm [SWAP]
└─centos-root253:1 0 17.5G 0 lvm /
sdb 8:16 0 20G 0 disk
sr0 11:0 1 1024M 0 rom
1.3、创建lvm（每个节点都需执行）
# pvcreate /dev/sdb
# vgcreate data /dev/sdb
# lvcreate --size 2G --name MySQL data
1.4、关闭防火墙（每个节点都需执行）
setenforce 0
sed -i.bak "s/SElinux=enforcing/SELINUX=permissive/g"/etc/selinux/config
systemctl disable firewalld.service
systemctl stop firewalld.service
iptables --flush
1.5、配置hosts文件
echo '192.168.100.11 node01 ' >>/etc/hosts
echo '192.168.100.12 node02 ' >>/etc/hosts
1.6、配置ntp（10.239.41.128为ntp服务器）每个节点都需执行
# chkconfig chronyd off
# chkconfig ntpd on
# sed -i "/^server/ 3.centos.pool/a server/ 10.239.41.128 "/etc/ntp.conf
# service ntpd start
# ntpq -p
1.6、配置互信（每个节点都需执行）
# ssh-keygen -t dsa -f ~/.ssh/id_dsa -N ""
# ssh-copy-id ha-node1
# ssh-copy-id ha-node2
二、安装drbd
2.1、安装drbd软件（各个节点）
# rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
#rpm-Uvh http://www.elrepo.org/elrepo-release-7.0-2.el7.elrepo.noarch.rpm
# yum install -y kmod-drbd84 drbd84-utils
2.2、配置文件介绍
/etc/drbd.conf #主配置文件
/etc/drbd.d/global_common.conf #全局配置文件
a、/etc/drbd.conf说明
主配置文件中包含了全局配置文件及”drbd.d/”目录下以.res结尾的文件
# You can find an example in /usr/share/doc/drbd.../drbd.conf.example
include "drbd.d/global_common.conf";
include "drbd.d/*.res";
b、/etc/drbd.d/global_common.conf说明
global {
usage-count no; #是否参加DRBD使用统计，默认为yes。官方统计drbd的装机量
# minor-count dialog-refreshdisable-ip-verification
}
common {
PRotocolC; #使用DRBD的同步协议
handlers {
# These are EXAMPLEhandlers only.
# They may have severeimplications,
# like hard resetting thenode under certain circumstances.
# Be careful when chosingyour poison.
pri-on-incon-degr"/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh;echo b > /proc/sysrq-trigger ; reboot -f";
pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ;reboot -f";
local-io-error "/usr/lib/drbd/notify-io-error.sh;/usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ;halt -f";
# fence-peer"/usr/lib/drbd/crm-fence-peer.sh";
# split-brain"/usr/lib/drbd/notify-split-brain.sh root";
# out-of-sync"/usr/lib/drbd/notify-out-of-sync.sh root";
# before-resync-target"/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k";
# after-resync-target/usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
}
startup {
# wfc-timeoutdegr-wfc-timeout outdated-wfc-timeout wait-after-sb
}
options {
# cpu-maskon-no-data-accessible
}
disk {
on-io-error detach; #配置I/O错误处理策略为分离
# size max-bio-bvecson-io-error fencing disk-barrier disk-flushes
# disk-drain md-flushesresync-rate resync-after al-extents
# c-plan-aheadc-delay-target c-fill-target c-max-rate
# c-min-rate disk-timeout
}
net {
# protocol timeoutmax-epoch-size max-buffers unplug-watermark
# connect-int ping-intsndbuf-size rcvbuf-size ko-count
# allow-two-primariescram-hmac-alg shared-secret after-sb-0pri
# after-sb-1priafter-sb-2pri always-asbp rr-conflict
# ping-timeoutdata-integrity-alg tcp-cork on-congestion
# congestion-fillcongestion-extents csums-alg verify-alg
# use-rle
}
syncer{ rate1024M;}
}
注释： on-io-error 策略可能为以下选项之一
detach 分离：这是默认和推荐的选项，如果在节点上发生底层的硬盘I/O错误，它会将设备运行在Diskless无盘模式下
pass_on：DRBD会将I/O错误报告到上层，在主节点上，它会将其报告给挂载的文件系统，但是在此节点上就往往忽略（因此此节点上没有可以报告的上层）
-local-in-error：调用本地磁盘I/O处理程序定义的命令；这需要有相应的local-io-error调用的资源处理程序处理错误的命令；这就给管理员有足够自由的权力命令命令或是脚本调用local-io-error处理I/O错误
c、定义一个资源
新建/etc/drbd.d/MySQL.res并写入下列内容
resource mysql { #资源名称
protocol C; #使用协议
meta-disk internal;
device /dev/drbd1; #DRBD设备名称
syncer {
verify-alg sha1;# 加密算法
}
net {
allow-two-primaries;
}
on ha-node1 {
disk /dev/data/mysql; drbd1使用的磁盘分区为"mysql"
address 192.168.8.51:7789; #设置DRBD监听地址与端口
}
on ha-node2 {
disk /dev/data/mysql;
address 192.168.8.52:7789;
}
}
2.4、将配置文件拷贝到node2上
# scp -rp /etc/drbd.d/* node02:/etc/drbd.d/1
2.5、启用drbd
# drbdadm create-md mysql
# modprobe drbd
# drbdadm up mysql
# drbdadm -- --force primary mysql
1
查看状态
# cat /proc/drbd 1
1
2.6、配置对端节点
# ssh node02 “drbdadm create-md mysql”
# ssh node02 “modprobe drbd”
# ssh node02 “drbdadm up mysql”
2.7、格式化设备并挂载
# mkfs.xfs /dev/drbd1
meta-data=/dev/drbd1 isize=256 agcount=4, agsize=65532 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0
data = bsize=4096 blocks=262127, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal log bsize=4096 blocks=853, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
挂载设备
# mount /dev/drbd1 /mnt/drbd
三、安装集群软件
3.1安装相关软件包
# yum install -y pacemaker pcs psmisc policycoreutils-python1
启动pcs服务并保持开机启动
# systemctl start pcsd.service
# systemctl enable pcsd.service
3.2修改用户hacluster的密码（各个节点）
# passwd hacluster
密码：hacluster
四、安装mysql（各个节点）
4.1、安装软件
# yum install epel* -y
# yum install mariadb mariadb-server MySQL-python
备注：修改 /etc/my.cnf 指定的数据库绑定目录（datadir=/mnt/drbd）
和修改 数据库绑定的目录 权限（chown –Rmysql.mysql /mnt/drbd）
4.2、禁止mysql开机启动
# chkconfig mariadb off
五、配置corosync
5.1认证各个节点，并创建集群（注意如果有代理记得取消）
# pcs cluster auth node01 node02
# pcs cluster setup --name mycluster node01 node02
5.2启动集群
[root@ha-node1 ~]# pcs cluster start --all
ha-node1: Starting Cluster...
ha-node2: Starting Cluster...
5.3验证corosync的安装
[root@ha-node1 ~]# corosync-cfgtool -s
Printing ring status.
Local node ID 1
RING ID 0
id = 192.168.8.51
status = ring 0 active with no faults
5.4查看接入成员
# corosync-cmapctl | grep members
runtime.totem.pg.mrp.srp.members.1.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.1.ip (str) = r(0) ip(192.168.8.51)
runtime.totem.pg.mrp.srp.members.1.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.1.status (str) = joined
runtime.totem.pg.mrp.srp.members.2.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.2.ip (str) = r(0) ip(192.168.8.52)
runtime.totem.pg.mrp.srp.members.2.join_count (u32) = 2
runtime.totem.pg.mrp.srp.members.2.status (str) = joined
5.5查看corosync状态
# pcs status corosync
Membership information
--------------------------
Nodeid Votes Name
1 1 ha-node1 (local)
2 1 ha-node2
5.6检查pacemaker的安装
# ps axf
PID TTY STAT TIME COMMAND
2 ? S 0:00 [kthreadd]
...lots of processes...
1362 ? Ssl 0:35 corosync
1379 ? Ss 0:00 /usr/sbin/pacemakerd -f
1380 ? Ss 0:00 /_ /usr/libexec/pacemaker/cib
1381 ? Ss 0:00 /_ /usr/libexec/pacemaker/stonithd
1382 ? Ss 0:00 /_ /usr/libexec/pacemaker/lrmd
1383 ? Ss 0:00 /_ /usr/libexec/pacemaker/attrd
1384 ? Ss 0:00 /_ /usr/libexec/pacemaker/pengine
1385 ? Ss 0:00 /_ /usr/libexec/pacemaker/crmd
5.7检查pcs status
[root@ha-node1 ~]# pcs status
Cluster name: mycluster
WARNING: no stonith devices and stonith-enabled is not false
Last updated: Tue Dec 16 16:15:29 2014
Last change: Tue Dec 16 15:49:47 2014
Stack: corosync
Current DC: ha-node2 (2) - partition with quorum
Version: 1.1.12-a14efad
2 Nodes configured
0 Resources configured
Online: [ ha-node1 ha-node2 ]
Full list of resources:
PCSD Status:
ha-node1: Online
ha-node2: Online
Daemon Status:
corosync: active/disabled
pacemaker: active/disabled
pcsd: active/enabled
5.8查看系统中error（stonith除外）
# journalctl | grep -i error1
1
六、配置集群（任选一个节点）
6.1集群属性
投票属性
# pcs property set no-quorum-policy=ignore
集群故障时候服务迁移
# pcs resource defaults migration-threshold=1
由于两个节点无stonith设备
# pcs property set stonith-enabled=false
在node1恢复后，为防止node2资源迁回node01（迁来迁去对还是会对业务有一定影响）
# pcs resource defaults resource-stickiness=100
# pcs resource defaults
设置资源超时时间
# pcs resource op defaults timeout=90s
# pcs resource op defaults
验证，正常无回显
# crm_verify –L -V
6.2配置浮动IP
# pcs resource create vip ocf:heartbeat:IPaddr2 ip=192.168.100.2 cidr_netmask=24op monitor interval=30s
vip为自定义的一个集群IP的名称，监控时间为30S
6.3配置drbd高可用
# umount /dev/drbd1（各个节点）
创建文件
# pcs cluster cib drbd_cfg
创建DRBD资源
#pcs -f drbd_cfg resource create DRBD ocf:linbit:drbddrbd_resource=mysql op monitor interval=60s
clone资源
# pcs -f drbd_cfg resource master DRBDClone DRBD /
master-max=1 master-node-max=1 clone-max=2 clone-node-max=1 /
notify=true
查看配置
[root@ha-node1 ~]# pcs -f drbd_cfg resource show
ClusterIP (ocf::heartbeat:IPaddr2): Started
mysqlSite (ocf::heartbeat:apache): Started
Master/Slave Set: mysqlDataClone [mysqlData]
Stopped: [node01 node02 ]
提交配置
# pcs cluster cib-push drbd_cfg
查看状态
[root@ha-node1 ~]# pcs status
Cluster name: mycluster
Last updated: Fri Aug 14 09:29:41 2015
Last change: Fri Aug 14 09:29:25 2015
Stack: corosync
Current DC: ha-node1 (1) - partition with quorum
Version: 1.1.12-a14efad
2 Nodes configured
4 Resources configured
Online: [ ha-node1 ha-node2 ]
Full list of resources:
ClusterIP (ocf::heartbeat:IPaddr2): Started ha-node1
mysqlSite (ocf::heartbeat:apache): Started ha-node1
Master/Slave Set: mysqlDataClone [mysqlData]
Masters: [ ha-node1 ]
Slaves: [ ha-node2 ]
PCSD Status:
ha-node1: Online
ha-node2: Online
Daemon Status:
corosync: active/disabled
pacemaker: active/disabled
pcsd: active/enabled
确保模块载入
# echo drbd >/etc/modules-load.d/drbd.conf
6.4配置文件系统高可用
创建文件
# pcs cluster cib fs_cfg
创建资源dbFS
# pcs -f fs_cfg resource create dbFS ocf:heartbeat:Filesystemdevice='/dev/drbd1' directory='/mnt/drbd' fstype='xfs'
将dbFS和DRBDClone绑定在一起
# pcs -f fs_cfg constraint colocation add dbFS with DRBDClone INFINITYwith-rsc-role=Master
设置启动顺序
# pcs -f fs_cfg constraint order promote DRBDClone then start dbFS
提交配置
# pcs cluster cib-push fs_cfg
6.5配置mariadb高可用 (2选一)
pcs resource create Mysql systemd:mariadbbinary="/usr/libexec/mysqld" config="/etc/my.cnf"datadir="/mnt/drbd/" pid="/var/run/mariadb/mariadb.pid" socket="/var/lib/mysql/mysql.sock"op start timeout=180s op stop timeout=180s op monitor interval=20s timeout=60s
配置资源关系
# pcs constraint colocation add Mysql vip INFINITY
pcs constraintcolocation add vip dbFS INFINITY
设置启动顺序
# pcs constraintorder dbFS then Mysql
测试： 数据库权限
( GRANT ALL PRIVILEGES ON *.* TO 'root'@'%'WITH GRANT OPTION;)
（GRANT ALL PRIVILEGESON *.* TO 'root'@'%'IDENTIFIED BY ‘mypassWord’ WITH GRANT OPTION; ）
>FLUSH PRIVILEGES;
查看资源约束关系
# pcs constraint –full
查询系统状态
# pcs status
七、群集操作命令
7.1、验证群集安装
# pacemakerd -F ## 查看pacemaker组件，ps axf | greppacemaker
# corosync-cfgtool -s ## 查看corosync序号
# corosync-cmapctl | grepmembers ## corosync 2.3.x
# corosync-objctl | grep members## corosync 1.4.x
7.2、查看群集资源
# pcs resource standards ## 查看支持资源类型
# pcs resource providers ## 查看资源提供商
# pcs resource agents ## 查看所有资源代理
# pcs resource list ## 查看支持资源列表
# pcs stonith list ## 查看支持Fence列表
# pcs property list --all ## 显示群集默认变量参数
# crm_simulate -sL ## 检验资源 score 值
7.3、使用群集脚本
# pcs cluster cib ra_cfg ## 将群集资源配置信息保存在指定文件
# pcs -f ra_cfg resource create## 创建群集资源并保存在指定文件中（而非保存在运行配置）
# pcs -f ra_cfg resource show ##显示指定文件的配置信息，检查无误后
# pcs cluster cib-push ra_cfg ##将指定配置文件加载到运行配置中
7.4、STONITH 设备操作
# stonith_admin -I ## 查询fence设备
# stonith_admin -M -a agent_name ## 查询fence设备的元数据，stonith_admin -M-a fence_vmware_soap
# stonith_admin --reboot nodename ## 测试 STONITH 设备
7.5、查看群集配置
# crm_verify -L -V ## 检查配置有无错误
# pcs property ## 查看群集属性
# pcs stonith ## 查看stonith
# pcs constraint ## 查看资源约束
# pcs config ## 查看群集资源配置
# pcs cluster cib ## 以xml格式显示群集配置
7.6、管理群集
# pcs status ## 查看群集状态
# pcs status cluster
# pcs status corosync
# pcs cluster stop [node11] ## 停止群集
# pcs cluster start --all ## 启动群集
# pcs cluster standby node11 ## 将节点置为后备standby状态，pcs clusterunstandby node11
# pcs cluster destroy [--all] ##删除群集，[--all]同时恢复corosync.conf文件
# pcs resource cleanup ClusterIP## 清除指定资源的状态与错误计数
# pcs stonith cleanupvmware-fencing ## 清除Fence资源的状态与错误计数
新闻热点
疑难解答
