Centos7下删除virbr0网卡信息的方法

2020-06-21 12:37:18

字体：大中小

来源：转载

供稿：网友

说明：之前在CentOS7下配置过bridge，现在讲bridge模式改为普通模式后，查看网卡的时候还是可以看到很多垃圾信息，想彻底删除自己不想要的网卡配置信息，操作如下:

[root@linux-node1 ~]# ip add list1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00    inet 127.0.0.1/8 scope host lo       valid_lft forever preferred_lft forever    inet6 ::1/128 scope host        valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000    link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff    inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0       valid_lft forever preferred_lft forever    inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link        valid_lft forever preferred_lft forever4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000    link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0       valid_lft forever preferred_lft forever5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000    link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff

查看网络列表：

[root@linux-node1 ~]# virsh net-list Name                 State      Autostart     Persistent---------------------------------------------------------- default              active     yes           yes

使用“virsh net-destroy default”删除

[root@linux-node1 ~]# virsh net-destroy defaultNetwork default destroyed

从配置文件中剔除

[root@linux-node1 ~]# virsh net-undefine defaultNetwork default has been undefined

重启libvirtd服务

[root@linux-node1 ~]# systemctl restart libvirtd.service[root@linux-node1 ~]# virsh net-list Name                 State      Autostart     Persistent----------------------------------------------------------[root@linux-node1 ~]# ip add list1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00    inet 127.0.0.1/8 scope host lo       valid_lft forever preferred_lft forever    inet6 ::1/128 scope host        valid_lft forever preferred_lft forever2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000    link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff    inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0       valid_lft forever preferred_lft forever    inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link        valid_lft forever preferred_lft forever

再次查看，发现不必要的信息已经清除，清爽多了

上一篇：centos7如何设置密码规则?centos7设置密码规则的方法

下一篇：virbr0虚拟网卡如何卸载?virbr0虚拟网卡的卸载方法